Water Treatment Insights
Technical Insights From Our Water Chemistry Lab
Practical guides, troubleshooting tips, and technical deep-dives on water treatment chemistry โ written by our engineers and chemists for plant operators, engineers, and facility managers.
RO Membrane Cleaning: When, How, and With What
A complete step-by-step guide to CIP (Clean-In-Place) protocols for RO membranes โ how to decide between low-pH and high-pH cleaning, how to calculate the right chemical dose, and how to verify cleaning effectiveness using normalized flow and rejection data.
From Our Technical Blog
Practical insights for plant engineers, operators, and facility managers โ written from real field experience.
How to Choose the Right Antiscalant for Your RO Plant
LSI, SDSI, and water chemistry โ a practical decision framework for plant engineers selecting between phosphonate, polycarboxylate, and blended antiscalants.
Boiler Scale: Causes, Costs, and Chemical Prevention
Why 1 mm of scale can increase fuel consumption by 2% โ and how to prevent it using phosphate programs, polymer dispersants, and oxygen scavengers.
Cooling Tower Water Chemistry: Cycles of Concentration Explained
How to balance cycles of concentration against scaling and corrosion risk โ the core trade-off in every cooling tower chemical program.
LSI vs. SDSI vs. Stiff-Davis: Which Scale Index Should You Use?
A plain-English guide to the four main scaling indices โ when each one applies, and how to interpret the numbers on your lab report.
Iron & Manganese Removal from Well Water: Media Selection Guide
Choosing between Crystal-Right zeolite, GEH Pyrolox, and ECOMIX โ based on pH, iron/manganese ratio, and presence of hardness.
RO Troubleshooting: 10 Common Symptoms and Their Causes
Low permeate flow? Rising conductivity? Falling rejection? A field guide to diagnosing the most common RO system problems.
Get Technical Insights in Your Inbox
Subscribe to our monthly newsletter โ practical guides on water chemistry, membrane care, chemical dosing, and industrial treatment. No spam. Unsubscribe anytime.
See How RO Plants Actually Work
Understanding the fundamentals is the first step to running a reliable plant. This 3D animation shows the full RO process โ from intake and pre-treatment, through high-pressure membrane stages, to post-treatment โ the same technologies our engineers write about every week.
Talk to an Engineer โHave a Technical Question You'd Like Us to Cover?
Send us your topic suggestion or technical challenge โ our engineers will consider it for a future article, or respond directly with practical advice.